Compression Connector, 2 in Conductor, 3.188 in Overall Length, Steel, Plated Zinc

Features:

• Material: Zinc-plated steel
• Size: 2 inches
• Type: Compression connector
• Usage: Joins EMT conduit to a box or enclosure
• Compliance: UL Standard 514B, NEMA FB-1
• Concrete Tight: When taped
• Thread Length: 0.688 inches
• Diameter: 2.938 inches
• Includes: Steel zinc-plated rigid locknut

Applications:

1. Joining EMT Conduits to Boxes or Enclosures: It is primarily used to connect EMT conduit to electrical boxes or enclosures, ensuring a secure and reliable connection 
    
2. Commercial and Residential Wiring: Commonly used in both commercial and residential electrical installations to maintain the integrity of the conduit system
    
3. Concrete Tight Applications: When taped, it provides concrete-tight protection, making it suitable for installations where a secure and moisture-resistant connection is required 
    
4. Indoor Electrical Systems: Specifically designed for indoor use, ensuring a reliable connection between EMT conduit and electrical boxes

Installation:

1. Preparation:

   • Ensure the ends of the EMT conduit are clean and free from burrs.
   • Measure and cut the conduit to the desired length.

2. Assembly:

   • Slide the compression connector onto one end of the EMT conduit.
   • Insert the other end of the conduit into the connector.

3. Tightening:

   • Use a wrench to tighten the compression nuts on both sides of the connector.
   • Ensure the connection is secure and concrete-tight if required (by taping the connector).

4. Connection to Box:

   • Insert the threaded end of the connector into the knockout hole of the electrical box.
   • Secure the connector to the box using the provided locknut. Tighten the locknut with a wrench to ensure a firm connection 

5. Inspection:

   • Check the connection to ensure it is tight and there are no gaps.
   • Verify that the connector is properly aligned with the conduit and the box.

Tools Required:

1. Pipe Cutter or Hacksaw: To cut the EMT conduit to the desired length.
2. Deburring Tool: To remove any burrs from the cut ends of the conduit.
3. Wrench: To tighten the compression nuts on the connector.
4. Tape Measure: To measure the conduit lengths accurately.
5. Level: To ensure the conduit is installed straight and level