ZENITH SBC36WW 2 DOOR SHAKER VANITY WITH TOP, WOOD, WHITE, CULTURED MARBLE SINK, WHITE SINK 1 EACH

Features:

• Dimensions: 36 inches wide, 18 inches deep, and 35 inches high 
• Material: Constructed from engineered wood with a white finish 
• Top: Comes with a white cultured marble top that includes an integrated sink and backsplash 
• Features: The vanity is fully assembled, has moisture and fade-resistant coating, and includes brushed nickel hardware
• Vanity Combo

Installation:

1. Preparation:

   • Ensure the area where the vanity will be installed is clean and free of debris.
   • Turn off the water supply to the sink area.

2. Positioning:

   • Place the vanity in the desired location. Ensure it is level and adjust if necessary.

3. Securing the Vanity:

   • Use screws to secure the vanity to the wall. Make sure to anchor into wall studs for stability.

4. Plumbing Connections:

   • Connect the water supply lines to the faucet (faucet sold separately).
   • Attach the drain assembly to the sink and connect it to the existing plumbing.

5. Finishing Touches:

   • Apply a bead of silicone sealant around the edges where the vanity meets the wall to prevent water damage.
   • Install the backsplash if it is a separate piece.

6. Testing:

   • Turn on the water supply and check for any leaks.
   • Ensure the faucet and drain are functioning properly.
   • The vanity comes fully assembled and includes a one-piece cultured marble sink top with an integrated bowl and backsplash

Tools needed: 

1. Tape Measure: To ensure accurate placement and alignment.
2. Level: To make sure the vanity is installed evenly.
3. Drill and Drill Bits: For making holes to secure the vanity to the wall.
4. Screwdriver: To tighten screws and secure the vanity.
5. Adjustable Wrench: For connecting plumbing fixtures.
6. Pipe Wrench: To tighten and loosen plumbing connections.
7. Silicone Sealant and Caulking Gun: To seal edges and prevent water damage.
8. Utility Knife: For cutting sealant and other materials.
9. Bucket and Towels: To catch any water spills during plumbing connections.
10. Stud Finder: To locate wall studs for secure mounting.